potaro67's post
cancel
Showing results for 
Search instead for 
Did you mean: 
Level 10

How to reduce the disturbance of GNSS (GPS) information

 
 
In order to reduce the disturbance of GNSS information, we have decided not to use Wi-Fi information.
 
I use the GPS Logger app to keep my GPS module running all the time.
However, if you set it to use Wi-Fi information, data that jumps for tens of meters will be mixed in once every few seconds.
 
By changing the setting so that Wi-Fi information is not used as shown below, you can obtain location information with the accuracy of GNSS data only.
 

 
The method of improving the accuracy of the GNSS data itself is a different story from this discussion.
 
The GPS Logger I use is an app with the following icons.
But recently I can't find this app in the Play Store. Therefore, I am in trouble because I cannot install this app on my new smartphone.
 
 

 

4 comments
Level 8

Re: How to reduce the disturbance of GNSS (GPS) information

Level 8

Re: How to reduce the disturbance of GNSS (GPS) information

@potaro67 さん、こんにちは。

 

これは、以前私がSVtpボードで書いた件ですね!でも、それでも、まだまだうねうねしてますよね。このうねうねを改善する方法が有ると良いのですが…。

 

それはさておき、GPS Loggerアプリ、私も使っていてスマホにアイコンが有るのですが、確かにGoogle Playで表示されませんねえ…。

キーワード "GPS Logger mendhak"でググってみたらGithubで開発管理しているアプリでした。昨年9月29日にGoogle Playから削除されたので開発中断中との事。そこにapkが公開されているので入手可能です、が、どうなんでしょうね?!理由を読むと涙々の、でも良く聞く気がする話でした。

 

ではでは。

Level 10

Re: How to reduce the disturbance of GNSS (GPS) information

Hi, @dzeek , thank you for the information.

I installed the GPS Logger on my new smartphone, the Pixel 5, and started using it.
I was able to get dense and accurate location information as below.
I am happy that I was able to obtain such highly accurate information from my smartphone in my chest pocket while driving a car.
I will think of ways to improve more accuracy.

 

 

Level 10

Re: How to reduce the disturbance of GNSS (GPS) information

やっと私も、 @Yotaroh  さんの知恵にこの点に関して追いつくことが出来ましたよ。
私は自分の手元で結果が見えるものしか理解できないので、実験しながらのんびりと付いていこうと思います。
 
Githubに関しては、Github内のどこかを指したURLが貼ってあってそれをクリックしたら何かが見える、という方法でしか、私は利用したことがありません。
私は20年前にはSEだったような記憶があるのですが、最近は生業が Sound Effectで、趣味は See Everywhere というSEであるので、まだGithubを読みに行くことさえ出来ていないのです。
これもおいおいと使えるようになっていきたいなあ。
 
 -  - 
 
さて、そのようにして位置情報の荒ぶりを抑えた方法で、SV App のVideoモードの撮影をしてきました。
思った以上の髙い精度で仕上がっているようです。
 

 
この中央の遺跡は現在修繕中です。目立つ青線のストリートビューにするならばちゃんと遺跡の櫓が見えている状態で撮影してくれよ、と現地の方には言われてしまうことでしょう。
まあ、修繕後の画像の更新は地元の方におまかせすることにしましょう。

 
 
「鬼滅の刃」の聖地でも実験しました。
狭い路地の左右さえも区別できるような精度を出すことが出来ています。

 

 
空が開けた場所では精度1m程度まで高められることはわかりました。
しかし、「みちびき」をちゃんと利用できたらセンチメートル単位まで精度が上げられるはずですよね。もう少しなんとかしたいものです。

 

https://www.facebook.com/shotaro.igami/posts/3533852613390865