Drone Technology Training Program at ESTC, Kaniya, Ramnagar, Uttarakhand, India

[IshantHP_ig]

First of all i want to tell about the name of institute where i have completed my training on Drone Technology with around 25 number of students at ESTC (ELECTRONICS SERVICES AND TRAINING CENTRE), it’s a government training centre which provide training for different trades of Engineering such as: Electrical, Electronics, Mechanical, Computer Science and Information Technology.

The Drone Technology course duration was 4 weeks ( 1st January to 31st January 2019), and we learned a lot of technical information regarding the drone assembly.

I am sharing Hardware Related Information related to Drone, i hope by the details you will be able to understand about the construction of Drone.

1. Frame of Drone

2. Motors

3. Propellers

4. Battery

5. Flight Controller (F.C)

6. Remote Controller (R.C)

7. Signal Receiver

8. Electronic Speed Controller (E.S.C)

9. Power Distribution Board (P.D.B)

@TravellerG @helga19 @TorM @FaridTDF @Aruni

[Petra_M]

Hello @IshantHP_ig ,

It looks very interesting, thanks for sharing.

I always wanted to try it, I think it’s and unforgettable experience. @PoliMC check out this post.

[PoliMC]

Hi @Petra_M ,

Thanks a lot for tagging me!

Yeah, you are right that it sounds very interesting and I am sure that @IshantHP_ig learned a lot of things on this course. But I am curious if you can show us photos from the drone? Or you just learned the technical part?

I am sure that @sonnyNg can say more about the drones because of his experience.

[sonnyNg]

Hi @IshantHP_ig ,

Thank you for sharing your experience with us.

It is great to see a great peace of engineering, as bellow the surface, all the chips and motherboards, motors and balancing/counterweight parts are being assembled beautifully. : ]

Much appreciated from @PoliMC for mentioning me!

[BorrisS]

Hello @IshantHP_ig ,

This really looks genuine! Thank you once again for sharing all these details with us.

Personally, I love the pictures and the videos that are usually taken by drones. Did you have the chance to make some?

[YasumiKikuchi]

Thank you tagging @IshantHP_ig
I am practicing maneuvering with a toy drone with no correction function. I am looking forward to your next article🚁

[IshantHP_ig]

Hello @Petra_M

Thanks for responding, the experience is really unforgettable. We learned a lot of information about the assembly of drone from the drone experts which came from New Delhi.

[IshantHP_ig]

Hello @PoliMC

Yeah you are right we learned only the technical aspects of drone and i also flight the drone by using Remote controller; but this type of drone doesnot supports the camera so we are unable to capture any shots by this drone but i record a video of drone flight, i’ll share with you. @Petra_M @BorrisS

[IshantHP_ig]

Hello @sonnyNg

Balancing is the main aspect in drone flight, to balace the drone we have to rotate one pair of propellers in clockwise direction and other two propellers in the anticlockwise direction by doing this drone get a proper balance and an optimum lift. A software also available to configure the drone such as rpm setting of motors and also for calibration of drone. The software name is Liber Pilot.

@BorrisS @PoliMC @Petra_M

[IshantHP_ig]

Good morning @YasumiKikuchi

Thanks for sharing your feedack related to drone

A toy drone is always my favourite. I also want to share a picture of programmable drone (Pluto X), i hope you listen about it. We can control this drone by an app (pluto controller) which is available on Google Playstore. This is a very basic drone and even children can easily flight it.

The cost of Pluto X around 15000 (INR) in Indian market if you have any type of drone then share your feedback/images/videos with me, i am really interested to know about drone.

I want to tagged some more people in this comment, hope they will like the mini drone too:)

** @BorrisS @sonnyNg @PoliMC @Petra_M **

[AbdullahAM]

Informative post, i like technological articles, thanks for sharing with us @IshantHP_ig

[PoliMC]

Hi @IshantHP_ig ,

Thanks a lot for your reply and the great description!

The mini drone is very nice and I am curious to see the video that you captured. I hope that the other Local Guides will share their experience of drones with you as well.

[Petra_M]

Thanks for the tag @IshantHP_ig ! Is it easier to use the mini drone? Is the quality of video the same when you use that?

[IshantHP_ig]

Hello @AbdullahAM

Thanks for giving feedback. I also like to read about the technical articles.

[IshantHP_ig]

Hello @PoliMC

Thanks a lot for your reply. Before posting this article i was little bit hesitated to post this drone related post with commnunity because i never see any type of post related to this field but i feel good that the Google Moderators and other local guides are taking interesting in this post:)

I have a question for you, have you fly a drone ? And how was the experience i really want to listen from you.

[IshantHP_ig]

Good afternoon:) @PoliMC

Actually the Pluto X drone has a separate camera mounting which can be easily fitted under the drone but we can not fly drone on public place we need a permission before the flight of drone.

[PoliMC]

Hi @IshantHP_ig ,

Thanks for your reply as well and you are welcome!

This post is very interesting and it’s related to the photography board so if you have other such ideas for posts, feel free to share them with us! It will be very useful for the other Local Guides as well.

Unfortunately, I’ve never tried to control a drone but @sonnyNg has experience with it so he can share with you more information.

[IshantHP_ig]

Thanks @PoliMC

For giving feedback:)

[RohitashRaghav]

Please tell us about fee and qualification.

[IshantHP_ig]

Hello @RohitashRaghav

Thanks for asking query related to drone. The minimum qualification of the course is diploma/B.tech (in any branch), the course fee is around 7000 INR+ 18% GST.